initial commit x2

flake.nix

@@ -0,0 +1,37 @@
+{
+  description = "furry flake";
+
+  inputs = {
+    nixpkgs.url = "github:NixOS/nixpkgs/nixos-unstable";
+    home-manager = {
+      url = "github:nix-community/home-manager";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+    
+    disko = {
+      url = "github:nix-community/disko";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+
+		zen-browser.url = "github:MarceColl/zen-browser-flake";
+  };
+
+  outputs = { self, nixpkgs, home-manager, disko, ... }@inputs: 
+    let
+      system = "x86_64-linux";
+      host = "sophron";
+      nick = "fox";
+    in {
+      nixosConfigurations.${host} = inputs.nixpkgs.lib.nixosSystem {
+	specialArgs = { inherit inputs; };
+	modules = [ ./system/default.nix disko.nixosModules.disko ];
+      };
+      
+      homeConfigurations.${nick} = inputs.home-manager.lib.homeManagerConfiguration {
+	pkgs = inputs.nixpkgs.legacyPackages.${system};
+	extraSpecialArgs = { inherit inputs; };
+	modules = [ ./home-manager/default.nix ];
+      };
+    };
+}
+

for_install/disko.nix

@@ -0,0 +1,39 @@
+{
+  disko.devices = {
+    disk = {
+      my-disk = {
+        device = "/dev/sda";
+        type = "disk";
+        content = {
+          type = "gpt";
+          partitions = {
+            ESP = {
+              type = "EF00";
+              size = "1G";
+              content = {
+                type = "filesystem";
+                format = "vfat";
+                mountpoint = "/boot";
+                mountOptions = [ "umask=0077" ];
+              };
+            };
+						swap = {
+							size = "10G";
+							content = {
+								type = "swap";
+							};
+						};
+            root = {
+              size = "100%";
+              content = {
+                type = "filesystem";
+                format = "ext4"; # да, я люблю ext4, минусы?
+                mountpoint = "/";
+              };
+            };
+          };
+        };
+      };
+    };
+  };
+}

for_install/etcConfig.nix

@@ -0,0 +1,53 @@
+{ config, lib, pkgs, ... }: {
+imports = [
+	./hardware-configuration.nix 
+	];
+
+boot.loader = {
+	systemd-boot.enable = true;
+	efi.canTouchEfiVariables = true;
+	};
+
+networking = {
+	hostName = "nix-fox";
+	networkmanager.enable = true;
+	};
+
+time.timeZone = "Asia/Yekaterinburg";
+
+i18n.defaultLocale = "ru_RU.UTF-8";
+console = {
+  font = "cyr-sun16";
+  keyMap = "ru";
+	};
+
+users.users.chronoblade = {
+  isNormalUser = true;
+  extraGroups = [ "wheel" ];
+	};
+
+environment.systemPackages = with pkgs; [
+  neovim
+  fastfetch
+  btop
+	];
+	
+programs.nh = {
+	enable = true;
+	package = pkgs.nh;
+	};
+
+services.openssh = {
+	enable = true;
+	ports = [ 95 ];
+	settings = {
+  PasswordAuthentication = true;
+	UseDns = true;
+	AllowUsers = [ "chronoblade" ];
+	PermitRootLogin = "yes";
+	};
+};
+
+system.stateVersion = "25.05";
+}
+

home-manager/apps/fastfetch.nix

@@ -0,0 +1,32 @@
+{ pkgs, ... }: {
+	programs.fastfetch = {
+		enable = true;
+		package = pkgs.fastfetch;
+		settings = {
+			logo.source = "nixos_small";
+			display.separator = " :: ";
+			modules = [
+				{
+					type = "os";
+					key = "dis";
+				}
+				{
+					type = "kernel";
+					key = "krn";
+				}
+				{
+					type = "uptime";
+					key = "upt";
+				}
+				{
+					type = "packages";
+					key = "pks";
+				}
+				{
+					type = "wm";
+					key = "wdm";
+				}
+			];
+		};
+	};
+}

home-manager/apps/git.nix

@@ -0,0 +1,7 @@
+{ config, ... }: {
+	programs.git = {
+		enable = true;
+		userName = "chronoblade";
+		userEmail = "sophr.temin@ro.ru";
+	};
+}

home-manager/apps/kitty.nix

@@ -0,0 +1,15 @@
+{ pkgs, ... }: {
+	programs.kitty = {
+		enable = true;
+		package = pkgs.kitty;
+		font = {
+			size = 10;
+			name = "JetBrainsMono NF";
+		};
+		settings = {
+			cursor_shape = "beam";
+			window_padding_width = 6;
+		};
+	  themeFile = "gruvbox-dark";
+	};
+}

home-manager/apps/neovim.nix

@@ -0,0 +1,24 @@
+{ pkgs, ... }: {
+  programs.neovim = {
+    enable = true;
+    package = pkgs.neovim-unwrapped;
+    defaultEditor = true;
+    plugins = with pkgs.vimPlugins; [
+		  vim-plug
+			gruvbox-nvim
+			yuck-vim
+			bufferline-nvim
+			nvim-web-devicons
+			nvim-lspconfig
+    ];
+    extraConfig = ''
+			 colorscheme gruvbox
+       set tabstop=2
+       set softtabstop=2
+       set shiftwidth=2
+			 set laststatus=0
+			 set number
+			 set shortmess+=I
+    '';
+  };
+}

home-manager/apps/zsh.nix

@@ -0,0 +1,66 @@
+{ pkgs, ... }: {
+	programs.zsh = {
+		enable = true;
+		package = pkgs.zsh;
+		plugins = [{
+				name = "zsh-autosuggestions";
+				src = pkgs.zsh-autosuggestions;
+			}
+			{
+				name = "zsh-highlighting";
+				src = pkgs.zsh-syntax-highlighting;
+			}];
+		shellAliases = 
+		let 
+			conf = "/home/chronoblade/nix/system/default.nix";
+			args = "-- --impure -I";
+			flake = "FLAKE='/home/chronoblade/nix'";
+		in {
+			"nhs" = "${flake} nh home switch ${args} ${conf}";
+			"nhsu" = "${flake} nh home switch --update ${args} ${conf}";
+			"nos" = "${flake} nh os switch ${args} ${conf}";
+			"nosu" = "${flake} nh os switch --update ${args} ${conf}";
+			"nca" = "${flake} nh clean all";
+		};
+		syntaxHighlighting = {
+			enable = true;
+			highlighters = [ "main" "brackets" "pattern" "regexp" "root" "line" ];
+			styles = 
+			 let 
+			  	fg = "#282828";
+		  		red = "#cc241d";
+		  		green = "#98971a";
+		  		yellow = "#79921";
+		  	  blue = "#458588";
+		  		orange = "#d65d0e";
+		  		aqua = "#689d6a";
+					purple = "#b16286";
+					gray = "#a89984";
+		  	in {
+					command = "fg=${blue},bold";
+					unknown-token = "fg=${red},bold";
+					reserved-word = "fg=${blue},bold";
+					alias = "fg=${aqua},bold";
+					builtin = "fg=${aqua},bold";
+					function = "fg=${fg},bold";
+					commandseparator = "fg=${green},bold";
+					path = "fg=${aqua},bold";
+					path_pathseparator = "fg=${aqua},bold";
+					globbing = "fg=${blue},bold";
+					command-sustitution = "fg=${green},bold";
+					single-hyphen-option = "fg=${green},bold";
+					double-hyphen-option = "fg=${aqua},bold";
+				  back-quoted-argument = "fg=${yellow},bold";
+					single-quoted-argument = "fg=${yellow},bold";
+					double-quoted-argument = "fg=${yellow},bold";
+					redirection = "fg=${purple},bold";
+					comment = "fg=${gray},bold";
+					arg0 = "fg=${blue},bold";
+					default = "fg=${blue},bold";
+				};
+		};
+		initExtra = ''
+			export PROMPT="%m %2~ %B::%b "
+		'';
+	};
+}

home-manager/configuration.nix

@@ -0,0 +1,40 @@
+{ config, pkgs, ... }: {
+	nixpkgs.config.allowUnfree = true;
+	home = {
+		username = "chronoblade";
+		homeDirectory = "/home/chronoblade";
+		stateVersion = "24.11";
+		packages = with pkgs; [
+			#Интернет
+			inputs.zen-browser.packages."${system}".default
+			transmission_4-gtk
+			filezilla
+			cassette
+
+			#Игры
+			prismlauncher
+			wineWowPackages.stable
+
+			#Рисовалка/медиа
+			krita
+			obs-studio
+			vlc
+
+			#ПРоги стола
+			nemo
+			eog
+			file-roller
+
+			#Заметки
+			obsidian
+      
+			#Утилиты
+			pamixer
+		  cava
+			playerctl
+			pavucontrol
+			grim
+			onefetch
+		];
+	};
+}

home-manager/default.nix

@@ -0,0 +1,18 @@
+{ ... }: {
+	imports = [
+		./configuration.nix
+
+		./apps/fastfetch.nix
+		./apps/git.nix
+		./apps/kitty.nix
+		./apps/neovim.nix
+		./apps/zsh.nix
+
+		./desktop/eww/eww.nix
+		./desktop/rofi/rofi.nix
+		./desktop/gtk.nix
+		./desktop/hyprland.nix
+		./desktop/hyprpaper.nix
+		./desktop/xdg.nix
+	];
+}

home-manager/desktop/eww/eww.nix

@@ -0,0 +1,8 @@
+{ pkgs, ... }: {
+  programs.eww = {
+    enable = true;
+    package = pkgs.eww;
+    enableZshIntegration = true;
+    configDir = "/home/$HOME/nix/home-manager/desktop/eww";
+  };
+}

home-manager/desktop/eww/eww.scss

@@ -0,0 +1,68 @@
+$bg: #282828;
+$fg: #ebdbb2;
+$bg2: #373633;
+$fg2: #32302f;
+
+* {
+	font-family: JetBrains Mono NF;
+	font-size: 14;
+	font-weight: 700;
+}
+
+.bar {
+  border: 2px solid $fg2;
+  border-radius: 12px;
+}
+
+.ws-number-class {
+  font-weight: 900; 
+  margin: 0px 5px 0px 10px;
+  background: $bg2; 
+  padding: 3px 5px 3px 5px;
+  border-radius: 6px;
+}
+
+.ws-title-class {
+  margin: 0px 5px;
+  padding: 3px 5px 3px 5px;
+  border-radius: 6px;
+}
+
+.right1 {
+  margin: 0px 10px;
+}
+
+.date-class {
+  background: $fg;
+  color: $bg;
+  padding: 3px 5px;
+  border-radius: 6px;
+}
+
+.volume-class {
+  background: $bg2;
+  margin: 0px 8px 0px 0px;
+  border-top-right-radius: 6px;
+  border-bottom-right-radius: 6px;
+}
+
+.language-class {
+  background: $bg2;
+  padding: 0px 10px 0px 5px;
+  border-top-left-radius: 6px;
+  border-bottom-left-radius: 6px;
+}
+
+.uptime-class {
+  margin: 0px 10px;
+}
+
+.music {
+  background: $bg2;
+  padding: 3px 3px;
+  border-radius: 6px;
+}
+
+
+
+

home-manager/desktop/eww/eww.yuck

@@ -0,0 +1,66 @@
+(defpoll WS :interval "0.1s" "/home/fox/.config/eww/workspace-number.sh")
+(defpoll WST :interval "0.1s" "/home/fox/.config/eww/workspace-title.sh")
+(defpoll DATE :interval "40s" "date +'%H:%M'")
+(defpoll VOL :interval "0.1s" "/home/fox/.config/eww/volume.sh")
+(defpoll LGN :interval "0.1s" "/home/fox/.config/eww/language.sh")
+(defpoll UPT :interval "3600s" "/home/fox/.config/eww/uptime.sh")
+(defpoll MS :interval "0.1s" "/home/fox/.config/eww/music.sh")
+
+(defwindow bar 
+  :monitor 0
+  :geometry (geometry :x "0"
+                      :y "7"
+                      :width "850"
+                      :height "45"
+                      :anchor "bottom center")
+  :stacking "fg"
+  :exclusive true
+  :windowtype "dock"
+  :wm-ignore false
+  (box (left) 
+       (center) 
+       (right)))
+
+(defwidget left []
+  (box :orientation "h"
+       :valign "center"
+       :space-evenly "false"
+       (box :halign "center"
+            :orientation "v"
+            (label :class "ws-number-class"
+                   :text WS))
+       (box :halign "start"
+            :orientation "v"
+            (label :class "ws-title-class"
+                   :text WST))))
+
+(defwidget center []
+  (box :orientation "h"
+       :halign "center"
+       :valign "center"
+       :class "music"
+       MS))
+
+(defwidget right []
+  (box :orientation "h"
+       :halign "end"
+       :valign "center"
+       :space-evenly "false"
+       :vexpand "false"
+       :hexpand "false"
+       :class "right1"
+       (box :orientation "h" :class "upt"
+         (label :class "uptime-class"
+                   :text UPT))
+       (box (label :class "language-class"
+                   :text LGN))
+       (box (label :class "volume-class"
+                   :text VOL))
+       (box (label :class "date-class"
+                   :text DATE))))
+
+
+
+
+
+

home-manager/desktop/eww/language.sh

@@ -0,0 +1,7 @@
+#!/bin/bash
+if hyprctl devices | grep -q "active keymap: Russian"; then
+    echo "ru"
+else
+    echo "en"
+fi
+

home-manager/desktop/eww/music.sh

@@ -0,0 +1,15 @@
+#!/bin/bash
+music=$(playerctl metadata --format "{{title}}" 2>/dev/null)
+
+max_length=15
+
+if [ -z "$music" ]; then
+    echo ":: No playing ::"
+else
+    if [ ${#music} -gt $max_length ]; then
+        echo "${music:0:$max_length}..."
+    else
+        echo "$music"
+    fi
+fi
+

home-manager/desktop/eww/uptime.sh

@@ -0,0 +1,3 @@
+command=$(uptime | awk '{print $3}')
+
+echo "$command "

home-manager/desktop/eww/volume.sh

@@ -0,0 +1,4 @@
+#!/bin/bash
+vol=$(pamixer --get-volume)
+
+echo "  $vol "

home-manager/desktop/eww/workspace-number.sh

@@ -0,0 +1,5 @@
+#!/bin/bash
+current_ws=$(hyprctl activeworkspace | grep "workspace ID" | awk '{print $3}' | head -n1)
+
+#echo "Workspace $current_ws"
+echo "  $current_ws"

home-manager/desktop/eww/workspace-title.sh

@@ -0,0 +1,25 @@
+#!/bin/bash
+current_tl=$(hyprctl activewindow | grep -A1 "title" | tail -n1 | awk '{$1=""; print substr($0, 2)}')
+air=""
+
+if [[ $current_tl != $air ]]; then
+		case $current_tl in
+			zen)
+				echo "  Browser"
+				;;
+			kitty)
+				echo "  Terminal"
+				;;
+			org.telegram.desktop)
+				echo "  Telegram"
+				;;
+			obsidian)
+				echo "  Obsidian"
+				;;
+			*)
+				echo "$current_tl"
+				;;
+		esac
+	else
+		echo "󰇄  Desktop"
+fi

home-manager/desktop/eww/ws.sh

@@ -0,0 +1,47 @@
+#!/bin/bash
+#c_ws=$(	hyprctl activeworkspace | grep "workspace ID" | awk '{print $3}' | head -1)
+#l_ws=""
+
+#while true; do
+#	if [[ "$c_ws" != "$l_ws" ]]; then
+#			echo $c_ws
+#	    l_ws=$c_ws
+#	fi
+#done
+
+#prev_value_ws=""
+#while true; do
+#  current_value_ws=$(hyprctl activeworkspace | grep "workspace ID" | awk '{print $3}' | head -1)  
+#  if [[ "$current_value_ws" != "$prev_value_ws" ]]; then
+#    echo "$current_value_ws"
+#    prev_value_ws="$current_value_ws"
+#  fi
+#done
+
+#prev_value_tl=""
+#while true; do
+#	current_value_tl=$(hyprctl activewindow | grep title | awk 'NR == 2' | awk '{print $2}')
+#	if [[ "$current_value_tl" != "$prev_value_tl" ]]; then
+#    echo "$current_value_tl"
+#   prev_value_ws="$current_value_tl"
+#  fi
+#done
+
+
+prev_ws=""
+prev_tl=""
+output_file="/home/fox/.cache/waybar_output"
+
+while true; do
+  current_ws=$(hyprctl activeworkspace | grep "workspace ID" | awk '{print $3}' | head -n1)
+  current_tl=$(hyprctl activewindow | grep -A1 "title" | tail -n1 | awk '{$1=""; print substr($0, 2)}')
+
+  if [[ "$current_ws" != "$prev_ws" || "$current_tl" != "$prev_tl" ]]; then
+    echo "$current_ws"
+		echo "$current_tl"
+    prev_ws="$current_ws"
+    prev_tl="$current_tl"
+  fi
+
+  sleep 0.1
+done

home-manager/desktop/gtk.nix

@@ -0,0 +1,45 @@
+{ pkgs, ... }: 
+	let
+		theme = "${pkgs.gruvbox-gtk-theme}/share/themes/Gruvbox-Dark";
+		theme-name = "Gruvbox-Dark";
+		icon = "Gruvbox-Plus-Dark";
+		cursor = "cursor";
+	in {
+	home.packages = [ 
+	pkgs.dconf 
+	pkgs.glib
+	pkgs.gruvbox-kvantum pkgs.qt6ct #перенести потом в qt.nix
+	];
+	gtk = {
+		enable = true;
+		font = {
+			size = 10;
+			name = "JetBrains Mono Medium";
+		};
+		gtk3 = {
+			extraCss = "${theme}/gtk-3.0/gtk-dark.css";
+			extraConfig = {
+				gtk-button-images = 0;
+				gtk-menu-images = 0;
+				gtk-application-prefer-dark-theme = 1;
+				button-layout = "";
+			};
+		};
+		gtk4 = {
+			extraCss = "${theme}/gtk-4.0/gtk-dark.css";
+			extraConfig = { buttom-layout = ""; };
+		};
+		iconTheme = {
+			name = "${icon}";
+			package = pkgs.gruvbox-plus-icons;
+		};
+		cursorTheme = {
+			name = "${cursor}";
+			package = pkgs.capitaine-cursors-themed;
+		};
+		theme = {
+			name = "${theme-name}";
+			package = pkgs.gruvbox-gtk-theme;
+		};
+	};
+}

home-manager/desktop/hyprland.nix

@@ -0,0 +1,155 @@
+{ pkgs, ... }: {
+	wayland.windowManager.hyprland = {
+		enable = true;
+		package = pkgs.hyprland;
+		portalPackage = pkgs.xdg-desktop-portal-hyprland;
+		xwayland.enable = true;
+		settings = {
+			autogenerated = 0;
+			monitor = "HDMI-A-2, 1920x1080@100, 0x0, 1";
+
+			exec-once = [ "hyprpaper" "eww open bar" ];
+			env = [
+			  "XCURSOR_SIZE,24"
+			  "HYPRCURSOR_SIZE,24"
+			  "QT_QPA_PLATFORMTHEME,qt6ct"
+			  "XDG_CURRENT_DESKTOP='Hyprland'"
+			  "XDG_SESSION_TYPE='wayland'"
+			  "XDG_SESSION_DESKTOP='Hyprland'"
+			  "QT_AUTO_SCREEN_SCALE_FACTOR='1'"
+			  "QT_QPA_PLATFORM='wayland'"
+			  "QT_QPA_PLATFORMTHEME='gtk3'"
+			];
+
+			general = {
+				gaps_in = 15;
+				gaps_out = 30;
+
+				border_size = 2;
+				col = {
+					active_border = "rgb(32302f)";
+					inactive_border = "rgb(1d2021)";
+				};
+
+				resize_on_border = true;
+				allow_tearing = true;
+				layout = "dwindle";
+			};
+
+			decoration = {
+				rounding = 10;
+				rounding_power = 2;
+
+				active_opacity = 1.0;
+				inactive_opacity = 1.0;
+
+				shadow = {
+					enabled = true;
+					range = 5;
+					render_power = 5;
+					color = "rgb(1d2021)";
+				};
+
+				blur = {
+					enabled = true;
+					size = 3;
+					passes = 1;
+
+					vibrancy = 0.1696;
+				};
+			};
+
+			animations {
+			  enabled = "yes, please :)";
+
+				bezier = [
+					"easeOutQuint,0.23,1,0.32,1"
+					"easeInOutCubic,0.65,0.05,0.36,1"
+					"linear,0,0,1,1"
+					"almostLinear,0.5,0.5,0.75,1.0"
+					"quick,0.15,0,0.1,1"
+				];
+
+				animation = [
+		      "global, 1, 10, default"
+		      "border, 1, 5.39, easeOutQuint"
+		      "windows, 1, 4.79, easeOutQuint"
+				  "windowsIn, 1, 4.1, easeOutQuint, popin 87%"
+				  "windowsOut, 1, 1.49, linear, popin 87%"
+				  "fadeIn, 1, 1.73, almostLinear"
+					"fadeOut, 1, 1.46, almostLinear"
+					"fade, 1, 3.03, quick"
+					"layers, 1, 3.81, easeOutQuint"
+					"layersIn, 1, 4, easeOutQuint, fade"
+					"layersOut, 1, 1.5, linear, fade"
+					"fadeLayersIn, 1, 1.79, almostLinear"
+					"fadeLayersOut, 1, 1.39, almostLinear"
+					"workspaces, 1, 1.94, almostLinear, fade"
+					"workspacesIn, 1, 1.21, almostLinear, fade"
+					"workspacesOut, 1, 1.94, almostLinear, fade"
+				];
+			};
+
+			dwindle = {
+				pseudotile = true;
+				preserve_split = true;
+			};
+
+			misc = {
+				force_default_wallpaper = 0;
+				disable_hyprland_logo = true;
+			};
+
+			input = {
+				kb_layout = "us,ru";
+			  kb_options = "grp:alt_shift_toggle";
+			  follow_mouse = 1;
+				sensitivity = 1.3;
+			};
+
+			gestures.workspace_swipe = false;
+
+			"$mod" = "SUPER";
+
+			bindm = [
+				"$mod, mouse:272, movewindow"
+				"$mod, mouse:273, redizewindow"
+			];
+
+			bind = [
+				"alt, l, exec, eww open lock-dialog"
+				"alt, g, exec, eww close bar"
+				"alt, m, exec, eww open bar"
+
+				"$mod shift, q, exit"
+				"$mod ctrl, r, exec, eww open reboot-dialog"
+				"$mod ctrl, q, exec, eww open off-dialog"
+				"alt, l, exec, eww open lock-dialog-zopa"
+
+				"$mod, c, killactive,"
+				"$mod, s, togglefloating,"
+				"$mod, t, pseudo,"
+				"$mod, g, togglesplit"
+
+				"alt, space, exec, rofi -show drun -config ~/.config/rofi/rofi.rasi"
+
+				"$mod, 1, workspace, 1"
+				"$mod, 2, workspace, 2"
+				"$mod, 3, workspace, 3"
+				"$mod, 4, workspace, 4"
+				"$mod, 5, workspace, 5"
+				"$mod, 6, workspace, 6"
+
+				"$mod SHIFT, 1, movetoworkspace, 1"
+				"$mod SHIFT, 2, movetoworkspace, 2"
+				"$mod SHIFT, 3, movetoworkspace, 3"
+				"$mod SHIFT, 4, movetoworkspace, 4"
+				"$mod SHIFT, 5, movetoworkspace, 5"
+				"$mod SHIFT, 6, movetoworkspace, 6"
+
+				"$mod, mouse_down, workspace, e+1"
+				"$mod, mouse_up, workspace, e-1"
+			];
+		};
+	};
+}

home-manager/desktop/hyprpaper.nix

@@ -0,0 +1,16 @@
+{ pkgs, ... }: {
+	services.hyprpaper = {
+		enable = true;
+		package = pkgs.hyprpaper;
+		settings = let 
+			wallp = "$HOME/nix/home-manager/desktop/wallp.jpg";
+		in {
+			preload = [
+				"${wallp}"
+			];
+			wallpaper = [
+				"HDMI-A-2, ${wallp}"
+			];
+		};
+	};
+}

home-manager/desktop/rofi/rofi.nix

@@ -0,0 +1,8 @@
+{ pkgs, config, ... }: {
+	programs.rofi = {
+		enable = true;
+		package = pkgs.rofi-wayland-unwrapped;
+		#package = pkgs.rofi;
+		# Я НЕНАВИЖУ ТОГО КТО ДЛЯ РОФИ ПИСАЛ ЭТОТ ПРИНИМАЮЩИЙ КОНФИГ
+	};
+}

home-manager/desktop/rofi/rofi.rasi

@@ -0,0 +1,94 @@
+* {
+	bg: #282828;
+	fg: #ebdbb2;
+}
+
+configuration {
+  modes: "drun"; 
+  font: "JetBrainsMono Regular 10";
+	location: 0;
+	xoffset: 0;
+	yoffset: 0;
+}
+
+window {
+  background-color: @bg;
+  width: 400;
+  border: 2px solid;
+	border-radius: 12px;
+	border-color: #32302f;
+}
+
+mainbox {
+  background-color: @bg;
+  padding: 6px;
+  margin: 8px;
+	border-radius: 12px;
+}
+
+inputbar {
+  background-color: @fg;
+  border: 2px solid;
+  border-color: @fg;
+  padding: 6px;
+  border-radius: 5px;
+}
+
+prompt {
+  enabled: false; 
+}
+
+textbox-prompt-colon {
+    expand: false; 
+    str: " "; 
+    background-color: @fg;
+    text-color: @bg;
+}
+
+entry {
+  background-color: @fg;
+  text-color: @bg;
+  cursor: text; 
+  placeholder: "Search..."; 
+  placeholder-color: @bg;
+}
+
+listview {
+  columns: 1; 
+  lines: 16; 
+  dynamic: true;
+  scrollbar: false; 
+  fixed-height: true; 
+  fixed-columns: true; 
+  background-color: @bg;
+  text-color: @fg;
+  margin: 5px 0px 0px 0px;
+}
+
+element {
+  background-color: @bg;
+  text-color: @fg;
+  padding: 8px 3px;
+}
+
+element normal.normal,
+element alternate.normal,
+message,
+error-message {
+  background-color: @bg;
+  text-color: @fg;
+}
+
+element selected.normal {
+  background-color: @fg;
+  text-color: @bg;
+  border-radius: 5px;
+	padding: 8px 4px;
+}
+
+error-message,
+textbox {
+  padding: 3px;
+  background-color: @bg;
+  text-color: @fg;
+}

home-manager/desktop/xdg.nix

@@ -0,0 +1,40 @@
+{ config, pkgs, ... }: {
+	xdg = {
+		enable = true;
+		portal = {
+			enable = true;
+			extraPortals = [ pkgs.xdg-desktop-portal-hyprland ];
+			config = {
+				common.default = "gtk";
+			};
+		};
+
+		cacheHome = builtins.toPath "${config.home.homeDirectory}/.cache";
+    configHome = builtins.toPath "${config.home.homeDirectory}/.config";
+    dataHome = builtins.toPath "${config.home.homeDirectory}/.local/share";
+    stateHome = builtins.toPath "${config.home.homeDirectory}/.local/state";
+
+    systemDirs = {
+      config = [ "/etc/xdg" ];
+      data = [ "/usr/share" "/usr/local/share" ];
+    };
+
+    userDirs = {
+      enable = true;
+      createDirectories = true;
+
+      desktop = builtins.toPath "${config.home.homeDirectory}/Desktop";
+      documents = builtins.toPath "${config.home.homeDirectory}/Documents";
+      download = builtins.toPath "${config.home.homeDirectory}/Downloads";
+      pictures = builtins.toPath "${config.home.homeDirectory}/Pictures";
+      videos = null;
+			music = null;
+      publicShare = null;
+      templates = null;
+
+      extraConfig = {
+        XDG_GIT_DIR = "${config.home.homeDirectory}/Repositories";
+      };
+    };
+	};
+}

old_rach/QtProject.conf

@@ -0,0 +1,8 @@
+[FileDialog]
+history=file:///home/fox/Изображения, file:///home/fox/Загрузки
+lastVisited=file:///home/fox/Изображения
+qtVersion=6.9.1
+shortcuts=file:, file:///home/fox
+sidebarWidth=100
+treeViewHeader=@ByteArray(\0\0\0\xff\0\0\0\0\0\0\0\x1\0\0\0\0\0\0\0\0\x1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x1\xb5\0\0\0\x4\x1\x1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x64\xff\xff\xff\xff\0\0\0\x81\0\0\0\0\0\0\0\x4\0\0\0\xe1\0\0\0\x1\0\0\0\0\0\0\0\x39\0\0\0\x1\0\0\0\0\0\0\0\x39\0\0\0\x1\0\0\0\0\0\0\0\x62\0\0\0\x1\0\0\0\0\0\0\x3\xe8\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x1)
+viewMode=Detail

old_rach/Thunar/uca.xml

@@ -0,0 +1,15 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<actions>
+<action>
+	<icon>utilities-terminal</icon>
+	<name>Open Terminal Here</name>
+	<submenu></submenu>
+	<unique-id>1749669074370126-1</unique-id>
+	<command>exo-open --working-directory %f --launch TerminalEmulator</command>
+	<description>Example for a custom action</description>
+	<range></range>
+	<patterns>*</patterns>
+	<startup-notify/>
+	<directories/>
+</action>
+</actions>

old_rach/ags/.gitignore

@@ -0,0 +1,2 @@
+node_modules/
+@girs/

old_rach/ags/app.ts

@@ -0,0 +1,9 @@
+import { App } from "astal/gtk3"
+import style from "./style.scss"
+import Bar from "./widget/Bar"
+
+App.start({
+    css: style,
+		instanceName: js,
+    main: () => App.get_monitors().map(Bar),
+})

old_rach/ags/env.d.ts

@@ -0,0 +1,21 @@
+declare const SRC: string
+
+declare module "inline:*" {
+    const content: string
+    export default content
+}
+
+declare module "*.scss" {
+    const content: string
+    export default content
+}
+
+declare module "*.blp" {
+    const content: string
+    export default content
+}
+
+declare module "*.css" {
+    const content: string
+    export default content
+}

old_rach/ags/package.json

@@ -0,0 +1,6 @@
+{
+    "name": "astal-shell",
+    "dependencies": {
+        "astal": "/usr/share/astal/gjs"
+    }
+}

old_rach/ags/style.scss

@@ -0,0 +1,20 @@
+// https://gitlab.gnome.org/GNOME/gtk/-/blob/gtk-3-24/gtk/theme/Adwaita/_colors-public.scss
+$fg-color: #{"@theme_fg_color"};
+$bg-color: #{"@theme_bg_color"};
+
+window.Bar {
+    background: transparent;
+    color: $fg-color;
+    font-weight: bold;
+
+    >centerbox {
+        background: $bg-color;
+        border-radius: 10px;
+        margin: 8px;
+    }
+
+    button {
+        border-radius: 8px;
+        margin: 2px;
+    }
+}

old_rach/ags/tsconfig.json

@@ -0,0 +1,14 @@
+{
+    "$schema": "https://json.schemastore.org/tsconfig",
+    "compilerOptions": {
+        "experimentalDecorators": true,
+        "strict": true,
+        "target": "ES2022",
+        "module": "ES2022",
+        "moduleResolution": "Bundler",
+        // "checkJs": true,
+        // "allowJs": true,
+        "jsx": "react-jsx",
+        "jsxImportSource": "astal/gtk3",
+    }
+}

old_rach/ags/widget/Bar.tsx

@@ -0,0 +1,31 @@
+import { App, Astal, Gtk, Gdk } from "astal/gtk3"
+import { Variable } from "astal"
+
+const time = Variable("").poll(1000, "date")
+
+export default function Bar(gdkmonitor: Gdk.Monitor) {
+    const { TOP, LEFT, RIGHT } = Astal.WindowAnchor
+
+    return <window
+        className="Bar"
+        gdkmonitor={gdkmonitor}
+        exclusivity={Astal.Exclusivity.EXCLUSIVE}
+        anchor={TOP | LEFT | RIGHT}
+        application={App}>
+        <centerbox>
+            <button
+                onClicked="echo hello"
+                halign={Gtk.Align.CENTER}
+            >
+                Welcome to AGS!
+            </button>
+            <box />
+            <button
+                onClicked={() => print("hello")}
+                halign={Gtk.Align.CENTER}
+            >
+                <label label={time()} />
+            </button>
+        </centerbox>
+    </window>
+}

old_rach/atbswp.cfg

@@ -0,0 +1,10 @@
+[DEFAULT]
+fast play speed = False
+infinite playback = False
+repeat count = 1
+recording hotkey = 348
+playback hotkey = 349
+always on top = True
+language = en
+recording timer = 0
+

old_rach/blender/4.4/config/platform_support.txt

@@ -0,0 +1 @@
+{Intel/Mesa Intel(R) HD Graphics 620 (KBL GT2F)/4.6 (Core Profile) Mesa 25.1.3-arch1.3}=SUPPORTED

old_rach/btop/btop.conf

@@ -0,0 +1,254 @@
+#? Config file for btop v. 1.4.3
+
+#* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
+#* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
+color_theme = "Default"
+
+#* If the theme set background should be shown, set to False if you want terminal background transparency.
+theme_background = True
+
+#* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false.
+truecolor = True
+
+#* Set to true to force tty mode regardless if a real tty has been detected or not.
+#* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols.
+force_tty = False
+
+#* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets.
+#* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box.
+#* Use whitespace " " as separator between different presets.
+#* Example: "cpu:0:default,mem:0:tty,proc:1:default cpu:0:braille,proc:0:tty"
+presets = "cpu:1:default,proc:0:default cpu:0:default,mem:0:default,net:0:default cpu:0:block,net:0:tty"
+
+#* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists.
+#* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift.
+vim_keys = False
+
+#* Rounded corners on boxes, is ignored if TTY mode is ON.
+rounded_corners = True
+
+#* Default symbols to use for graph creation, "braille", "block" or "tty".
+#* "braille" offers the highest resolution but might not be included in all fonts.
+#* "block" has half the resolution of braille but uses more common characters.
+#* "tty" uses only 3 different symbols but will work with most fonts and should work in a real TTY.
+#* Note that "tty" only has half the horizontal resolution of the other two, so will show a shorter historical view.
+graph_symbol = "braille"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_cpu = "default"
+
+# Graph symbol to use for graphs in gpu box, "default", "braille", "block" or "tty".
+graph_symbol_gpu = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_mem = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_net = "default"
+
+# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
+graph_symbol_proc = "default"
+
+#* Manually set which boxes to show. Available values are "cpu mem net proc" and "gpu0" through "gpu5", separate values with whitespace.
+shown_boxes = "cpu mem net proc"
+
+#* Update time in milliseconds, recommended 2000 ms or above for better sample times for graphs.
+update_ms = 2000
+
+#* Processes sorting, "pid" "program" "arguments" "threads" "user" "memory" "cpu lazy" "cpu direct",
+#* "cpu lazy" sorts top process over time (easier to follow), "cpu direct" updates top process directly.
+proc_sorting = "cpu lazy"
+
+#* Reverse sorting order, True or False.
+proc_reversed = False
+
+#* Show processes as a tree.
+proc_tree = False
+
+#* Use the cpu graph colors in the process list.
+proc_colors = True
+
+#* Use a darkening gradient in the process list.
+proc_gradient = True
+
+#* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
+proc_per_core = False
+
+#* Show process memory as bytes instead of percent.
+proc_mem_bytes = True
+
+#* Show cpu graph for each process.
+proc_cpu_graphs = True
+
+#* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
+proc_info_smaps = False
+
+#* Show proc box on left side of screen instead of right.
+proc_left = False
+
+#* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
+proc_filter_kernel = False
+
+#* In tree-view, always accumulate child process resources in the parent process.
+proc_aggregate = False
+
+#* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
+#* Select from a list of detected attributes from the options menu.
+cpu_graph_upper = "Auto"
+
+#* Sets the CPU stat shown in lower half of the CPU graph, "total" is always available.
+#* Select from a list of detected attributes from the options menu.
+cpu_graph_lower = "Auto"
+
+#* If gpu info should be shown in the cpu box. Available values = "Auto", "On" and "Off".
+show_gpu_info = "Auto"
+
+#* Toggles if the lower CPU graph should be inverted.
+cpu_invert_lower = True
+
+#* Set to True to completely disable the lower CPU graph.
+cpu_single_graph = False
+
+#* Show cpu box at bottom of screen instead of top.
+cpu_bottom = False
+
+#* Shows the system uptime in the CPU box.
+show_uptime = True
+
+#* Show cpu temperature.
+check_temp = True
+
+#* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
+cpu_sensor = "Auto"
+
+#* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
+show_coretemp = True
+
+#* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
+#* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
+#* Format "x:y" x=core with wrong temp, y=core with correct temp, use space as separator between multiple entries.
+#* Example: "4:0 5:1 6:3"
+cpu_core_map = ""
+
+#* Which temperature scale to use, available values: "celsius", "fahrenheit", "kelvin" and "rankine".
+temp_scale = "celsius"
+
+#* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
+base_10_sizes = False
+
+#* Show CPU frequency.
+show_cpu_freq = True
+
+#* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
+#* Special formatting: /host = hostname | /user = username | /uptime = system uptime
+clock_format = "%X"
+
+#* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
+background_update = True
+
+#* Custom cpu model name, empty string to disable.
+custom_cpu_name = ""
+
+#* Optional filter for shown disks, should be full path of a mountpoint, separate multiple values with whitespace " ".
+#* Begin line with "exclude=" to change to exclude filter, otherwise defaults to "most include" filter. Example: disks_filter="exclude=/boot /home/user".
+disks_filter = ""
+
+#* Show graphs instead of meters for memory values.
+mem_graphs = True
+
+#* Show mem box below net box instead of above.
+mem_below_net = False
+
+#* Count ZFS ARC in cached and available memory.
+zfs_arc_cached = True
+
+#* If swap memory should be shown in memory box.
+show_swap = True
+
+#* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
+swap_disk = True
+
+#* If mem box should be split to also show disks info.
+show_disks = True
+
+#* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
+only_physical = True
+
+#* Read disks list from /etc/fstab. This also disables only_physical.
+use_fstab = True
+
+#* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool)
+zfs_hide_datasets = False
+
+#* Set to true to show available disk space for privileged users.
+disk_free_priv = False
+
+#* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
+show_io_stat = True
+
+#* Toggles io mode for disks, showing big graphs for disk read/write speeds.
+io_mode = False
+
+#* Set to True to show combined read/write io graphs in io mode.
+io_graph_combined = False
+
+#* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
+#* Example: "/mnt/media:100 /:20 /boot:1".
+io_graph_speeds = ""
+
+#* Set fixed values for network graphs in Mebibits. Is only used if net_auto is also set to False.
+net_download = 100
+
+net_upload = 100
+
+#* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
+net_auto = True
+
+#* Sync the auto scaling for download and upload to whichever currently has the highest scale.
+net_sync = True
+
+#* Starts with the Network Interface specified here.
+net_iface = ""
+
+#* "True" shows bitrates in base 10 (Kbps, Mbps). "False" shows bitrates in binary sizes (Kibps, Mibps, etc.). "Auto" uses base_10_sizes.
+base_10_bitrate = "Auto"
+
+#* Show battery stats in top right if battery is present.
+show_battery = True
+
+#* Which battery to use if multiple are present. "Auto" for auto detection.
+selected_battery = "Auto"
+
+#* Show power stats of battery next to charge indicator.
+show_battery_watts = True
+
+#* Set loglevel for "~/.config/btop/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
+#* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
+log_level = "WARNING"
+
+#* Measure PCIe throughput on NVIDIA cards, may impact performance on certain cards.
+nvml_measure_pcie_speeds = True
+
+#* Measure PCIe throughput on AMD cards, may impact performance on certain cards.
+rsmi_measure_pcie_speeds = True
+
+#* Horizontally mirror the GPU graph.
+gpu_mirror_graph = True
+
+#* Custom gpu0 model name, empty string to disable.
+custom_gpu_name0 = ""
+
+#* Custom gpu1 model name, empty string to disable.
+custom_gpu_name1 = ""
+
+#* Custom gpu2 model name, empty string to disable.
+custom_gpu_name2 = ""
+
+#* Custom gpu3 model name, empty string to disable.
+custom_gpu_name3 = ""
+
+#* Custom gpu4 model name, empty string to disable.
+custom_gpu_name4 = ""
+
+#* Custom gpu5 model name, empty string to disable.
+custom_gpu_name5 = ""

old_rach/cava/config

@@ -0,0 +1,280 @@
+## Configuration file for CAVA.
+# Remove the ; to change parameters.
+
+
+[general]
+
+# Smoothing mode. Can be 'normal', 'scientific' or 'waves'. DEPRECATED as of 0.6.0
+; mode = normal
+
+# Accepts only non-negative values.
+; framerate = 60
+
+# 'autosens' will attempt to decrease sensitivity if the bars peak. 1 = on, 0 = off
+# new as of 0.6.0 autosens of low values (dynamic range)
+# 'overshoot' allows bars to overshoot (in % of terminal height) without initiating autosens. DEPRECATED as of 0.6.0
+; autosens = 1
+; overshoot = 20
+
+# Manual sensitivity in %. If autosens is enabled, this will only be the initial value.
+# 200 means double height. Accepts only non-negative values.
+; sensitivity = 100
+
+# The number of bars (0-512). 0 sets it to auto (fill up console).
+# Bars' width and space between bars in number of characters.
+; bars = 0
+; bar_width = 2
+; bar_spacing = 1
+# bar_height is only used for output in "noritake" format
+; bar_height = 32
+
+# For SDL width and space between bars is in pixels, defaults are:
+; bar_width = 20
+; bar_spacing = 5
+
+# sdl_glsl have these default values, they are only used to calculate max number of bars.
+; bar_width = 1
+; bar_spacing = 0
+
+
+# Lower and higher cutoff frequencies for lowest and highest bars
+# the bandwidth of the visualizer.
+# Note: there is a minimum total bandwidth of 43Mhz x number of bars.
+# Cava will automatically increase the higher cutoff if a too low band is specified.
+; lower_cutoff_freq = 50
+; higher_cutoff_freq = 10000
+
+
+# Seconds with no input before cava goes to sleep mode. Cava will not perform FFT or drawing and
+# only check for input once per second. Cava will wake up once input is detected. 0 = disable.
+; sleep_timer = 0
+
+
+[input]
+
+# Audio capturing method. Possible methods are: 'fifo', 'portaudio', 'pipewire', 'alsa', 'pulse', 'sndio', 'oss', 'jack' or 'shmem'
+# Defaults to 'oss', 'pipewire', 'sndio', 'jack', 'pulse', 'alsa', 'portaudio' or 'fifo', in that order, dependent on what support cava was built with.
+# On Mac it defaults to 'portaudio' or 'fifo'
+# On windows this is automatic and no input settings are needed.
+#
+# All input methods uses the same config variable 'source'
+# to define where it should get the audio.
+#
+# For pulseaudio and pipewire 'source' will be the source. Default: 'auto', which uses the monitor source of the default sink
+# (all pulseaudio sinks(outputs) have 'monitor' sources(inputs) associated with them).
+#
+# For pipewire 'source' will be the object name or object.serial of the device to capture from.
+# Both input and output devices are supported.
+#
+# For alsa 'source' will be the capture device.
+# For fifo 'source' will be the path to fifo-file.
+# For shmem 'source' will be /squeezelite-AA:BB:CC:DD:EE:FF where 'AA:BB:CC:DD:EE:FF' will be squeezelite's MAC address
+#
+# For sndio 'source' will be a raw recording audio descriptor or a monitoring sub-device, e.g. 'rsnd/2' or 'snd/1'. Default: 'default'.
+# README.md contains further information on how to setup CAVA for sndio.
+#
+# For oss 'source' will be the path to a audio device, e.g. '/dev/dsp2'. Default: '/dev/dsp', i.e. the default audio device.
+# README.md contains further information on how to setup CAVA for OSS on FreeBSD.
+#
+# For jack 'source' will be the name of the JACK server to connect to, e.g. 'foobar'. Default: 'default'.
+# README.md contains further information on how to setup CAVA for JACK.
+#
+ method = pulse
+ source = 0
+
+; method = pipewire
+; source = auto
+
+; method = alsa
+; source = hw:Loopback,1
+
+; method = fifo
+; source = /tmp/mpd.fifo
+
+; method = shmem
+; source = /squeezelite-AA:BB:CC:DD:EE:FF
+
+; method = portaudio
+; source = auto
+
+; method = sndio
+; source = default
+
+; method = oss
+; source = /dev/dsp
+
+; method = jack
+; source = default
+
+# The options 'sample_rate', 'sample_bits', 'channels' and 'autoconnect' can be configured for some input methods:
+#   sample_rate: fifo, pipewire, sndio, oss
+#   sample_bits: fifo, pipewire, sndio, oss
+#   channels:    sndio, oss, jack
+#   autoconnect: jack
+# Other methods ignore these settings.
+#
+# For 'sndio' and 'oss' they are only preferred values, i.e. if the values are not supported
+# by the chosen audio device, the device will use other supported values instead.
+# Example: 48000, 32 and 2, but the device only supports 44100, 16 and 1, then it
+# will use 44100, 16 and 1.
+#
+; sample_rate = 44100
+; sample_bits = 16
+; channels = 2
+; autoconnect = 2
+
+
+[output]
+
+# Output method. Can be 'ncurses', 'noncurses', 'raw', 'noritake', 'sdl'
+# or 'sdl_glsl'.
+# 'noncurses' (default) uses a buffer and cursor movements to only print
+# changes from frame to frame in the terminal. Uses less resources and is less
+# prone to tearing (vsync issues) than 'ncurses'.
+#
+# 'raw' is an 8 or 16 bit (configurable via the 'bit_format' option) data
+# stream of the bar heights that can be used to send to other applications.
+# 'raw' defaults to 200 bars, which can be adjusted in the 'bars' option above.
+#
+# 'noritake' outputs a bitmap in the format expected by a Noritake VFD display
+#  in graphic mode. It only support the 3000 series graphical VFDs for now.
+#
+# 'sdl' uses the Simple DirectMedia Layer to render in a graphical context.
+# 'sdl_glsl' uses SDL to create an OpenGL context. Write your own shaders or
+# use one of the predefined ones.
+; method = noncurses
+
+# Orientation of the visualization. Can be 'bottom', 'top', 'left', 'right' or
+# 'horizontal'. Default is 'bottom'. 'left and 'right' are only supported on sdl
+# and ncruses output. 'horizontal' (bars go up and down from center) is only supported
+# on noncurses output.
+# Note: many fonts have weird or missing glyphs for characters used in orientations
+# other than 'bottom', which can make output not look right.
+; orientation = bottom
+
+# Visual channels. Can be 'stereo' or 'mono'.
+# 'stereo' mirrors both channels with low frequencies in center.
+# 'mono' outputs left to right lowest to highest frequencies.
+# 'mono_option' set mono to either take input from 'left', 'right' or 'average'.
+# set 'reverse' to 1 to display frequencies the other way around.
+; channels = stereo
+; mono_option = average
+; reverse = 0
+
+# Raw output target. A fifo will be created if target does not exist.
+; raw_target = /dev/stdout
+
+# Raw data format. Can be 'binary' or 'ascii'.
+; data_format = binary
+
+# Binary bit format, can be '8bit' (0-255) or '16bit' (0-65530).
+; bit_format = 16bit
+
+# Ascii max value. In 'ascii' mode range will run from 0 to value specified here
+; ascii_max_range = 1000
+
+# Ascii delimiters. In ascii format each bar and frame is separated by a delimiters.
+# Use decimal value in ascii table (i.e. 59 = ';' and 10 = '\n' (line feed)).
+; bar_delimiter = 59
+; frame_delimiter = 10
+
+# sdl window size and position. -1,-1 is centered.
+; sdl_width = 1000
+; sdl_height = 500
+; sdl_x = -1
+; sdl_y= -1
+; sdl_full_screen = 0
+
+# set label on bars on the x-axis. Can be 'frequency' or 'none'. Default: 'none'
+# 'frequency' displays the lower cut off frequency of the bar above.
+# Only supported on ncurses and noncurses output.
+; xaxis = none
+ 
+# enable synchronized sync. 1 = on, 0 = off
+# removes flickering in alacritty terminal emulator.
+# defaults to off since the behaviour in other terminal emulators is unknown
+; synchronized_sync = 0
+
+# Shaders for sdl_glsl, located in $HOME/.config/cava/shaders
+; vertex_shader = pass_through.vert
+; fragment_shader = bar_spectrum.frag
+
+; for glsl output mode, keep rendering even if no audio
+; continuous_rendering = 0
+
+# disable console blank (screen saver) in tty
+# (Not supported on FreeBSD)
+; disable_blanking = 0
+
+# show a flat bar at the bottom of the screen when idle, 1 = on, 0 = off
+; show_idle_bar_heads = 1
+
+# show waveform instead of frequency spectrum, 1 = on, 0 = off
+; waveform = 0
+
+[color]
+
+# Colors can be one of seven predefined: black, blue, cyan, green, magenta, red, white, yellow.
+# Or defined by hex code '#xxxxxx' (hex code must be within ''). User defined colors requires
+# a terminal that can change color definitions such as Gnome-terminal or rxvt.
+# default is to keep current terminal color
+; background = default
+; foreground = default
+
+# SDL and sdl_glsl only support hex code colors, these are the default:
+; background = '#111111'
+; foreground = '#33ffff'
+
+
+# Gradient mode, only hex defined colors are supported,
+# background must also be defined in hex or remain commented out. 1 = on, 0 = off.
+# You can define as many as 8 different colors. They range from bottom to top of screen
+; gradient = 0
+; gradient_color_1 = '#59cc33'
+; gradient_color_2 = '#80cc33'
+; gradient_color_3 = '#a6cc33'
+; gradient_color_4 = '#cccc33'
+; gradient_color_5 = '#cca633'
+; gradient_color_6 = '#cc8033'
+; gradient_color_7 = '#cc5933'
+; gradient_color_8 = '#cc3333'
+
+
+
+[smoothing]
+
+# Percentage value for integral smoothing. Takes values from 0 - 100.
+# Higher values means smoother, but less precise. 0 to disable.
+# DEPRECATED as of 0.8.0, use noise_reduction instead
+; integral = 77
+
+# Disables or enables the so-called "Monstercat smoothing" with or without "waves". Set to 0 to disable.
+; monstercat = 0
+; waves = 0
+
+# Set gravity percentage for "drop off". Higher values means bars will drop faster.
+# Accepts only non-negative values. 50 means half gravity, 200 means double. Set to 0 to disable "drop off".
+# DEPRECATED as of 0.8.0, use noise_reduction instead
+; gravity = 100
+
+
+# In bar height, bars that would have been lower that this will not be drawn.
+# DEPRECATED as of 0.8.0
+; ignore = 0
+
+# Noise reduction, int 0 - 100. default 77
+# the raw visualization is very noisy, this factor adjusts the integral and gravity filters to keep the signal smooth
+# 100 will be very slow and smooth, 0 will be fast but noisy.
+; noise_reduction = 77
+
+
+[eq]
+
+# This one is tricky. You can have as much keys as you want.
+# Remember to uncomment more than one key! More keys = more precision.
+# Look at readme.md on github for further explanations and examples.
+; 1 = 1 # bass
+; 2 = 1
+; 3 = 1 # midtone
+; 4 = 1
+; 5 = 1 # treble

old_rach/cava/shaders/bar_spectrum.frag

@@ -0,0 +1,79 @@
+#version 330
+
+in vec2 fragCoord;
+out vec4 fragColor;
+
+// bar values. defaults to left channels first (low to high), then right (high to low).
+uniform float bars[512];
+
+uniform int bars_count;    // number of bars (left + right) (configurable)
+uniform int bar_width;    // bar width (configurable), not used here
+uniform int bar_spacing;    // space bewteen bars (configurable)
+
+uniform vec3 u_resolution; // window resolution
+
+//colors, configurable in cava config file (r,g,b) (0.0 - 1.0)
+uniform vec3 bg_color; // background color
+uniform vec3 fg_color; // foreground color
+
+uniform int gradient_count;
+uniform vec3 gradient_colors[8]; // gradient colors
+
+vec3 normalize_C(float y,vec3 col_1, vec3 col_2, float y_min, float y_max)
+{
+    //create color based on fraction of this color and next color
+    float yr = (y - y_min) / (y_max - y_min);
+    return col_1 * (1.0 - yr) + col_2 * yr;
+}
+
+void main()
+{
+    // find which bar to use based on where we are on the x axis
+    float x = u_resolution.x * fragCoord.x;
+    int bar = int(bars_count * fragCoord.x);
+
+    //calculate a bar size
+    float bar_size = u_resolution.x / bars_count;
+
+    //the y coordinate and bar values are the same
+    float y =  bars[bar];
+
+    // make sure there is a thin line at bottom
+    if (y * u_resolution.y < 1.0)
+    {
+      y = 1.0 / u_resolution.y;
+    }
+
+    //draw the bar up to current height
+    if (y > fragCoord.y)
+    {
+        //make some space between bars basen on settings
+        if (x > (bar + 1) * (bar_size) - bar_spacing)
+        {
+            fragColor = vec4(bg_color,1.0);
+        }
+        else
+        {
+            if (gradient_count == 0)
+            {
+                fragColor = vec4(fg_color,1.0);
+            }
+            else
+            {
+                //find which color in the configured gradient we are at
+                int color = int((gradient_count - 1) * fragCoord.y);
+
+                //find where on y this and next color is supposed to be
+                float y_min = color / (gradient_count - 1.0);
+                float y_max = (color + 1.0) / (gradient_count - 1.0);
+
+                //make color
+                fragColor = vec4(normalize_C(fragCoord.y, gradient_colors[color], gradient_colors[color + 1], y_min, y_max), 1.0);
+            }
+        }
+    }
+    else
+    {
+        fragColor = vec4(bg_color,1.0);
+    }
+}

old_rach/cava/shaders/northern_lights.frag

@@ -0,0 +1,34 @@
+#version 330
+
+in vec2 fragCoord;
+out vec4 fragColor;
+
+// bar values. defaults to left channels first (low to high), then right (high to low).
+uniform float bars[512];
+
+uniform int bars_count;    // number of bars (left + right) (configurable)
+
+uniform vec3 u_resolution; // window resolution, not used here
+
+//colors, configurable in cava config file
+uniform vec3 bg_color; // background color(r,g,b) (0.0 - 1.0), not used here
+uniform vec3 fg_color; // foreground color, not used here
+
+void main()
+{
+    // find which bar to use based on where we are on the x axis
+    int bar = int(bars_count * fragCoord.x);
+
+    float bar_y = 1.0 - abs((fragCoord.y - 0.5)) * 2.0;
+    float y = (bars[bar]) * bar_y;
+
+    float bar_x = (fragCoord.x - float(bar) / float(bars_count)) * bars_count;
+    float bar_r = 1.0 - abs((bar_x - 0.5)) * 2;
+
+    bar_r = bar_r * bar_r * 2;
+
+    // set color
+    fragColor.r = fg_color.x * y * bar_r;
+    fragColor.g = fg_color.y * y * bar_r;
+    fragColor.b = fg_color.z * y * bar_r;
+}

old_rach/cava/shaders/pass_through.vert

@@ -0,0 +1,14 @@
+#version 330
+
+
+// Input vertex data, different for all executions of this shader.
+layout(location = 0) in vec3 vertexPosition_modelspace;
+
+// Output data ; will be interpolated for each fragment.
+out vec2 fragCoord;
+
+void main()
+{
+    gl_Position =  vec4(vertexPosition_modelspace,1);
+    fragCoord  = (vertexPosition_modelspace.xy+vec2(1,1))/2.0;
+}

old_rach/cava/shaders/spectrogram.frag

@@ -0,0 +1,53 @@
+#version 330
+
+in vec2 fragCoord;
+out vec4 fragColor;
+
+// bar values. defaults to left channels first (low to high), then right (high
+// to low).
+uniform float bars[512];
+
+uniform int bars_count;  // number of bars (left + right) (configurable)
+uniform int bar_width;   // bar width (configurable), not used here
+uniform int bar_spacing; // space bewteen bars (configurable)
+
+uniform vec3 u_resolution; // window resolution
+
+// colors, configurable in cava config file (r,g,b) (0.0 - 1.0)
+uniform vec3 bg_color; // background color
+uniform vec3 fg_color; // foreground color
+
+uniform int gradient_count;
+uniform vec3 gradient_colors[8]; // gradient colors
+
+uniform sampler2D inputTexture; // Texture from the first render pass
+
+vec3 normalize_C(float y, vec3 col_1, vec3 col_2, float y_min, float y_max) {
+  // create color based on fraction of this color and next color
+  float yr = (y - y_min) / (y_max - y_min);
+  return col_1 * (1.0 - yr) + col_2 * yr;
+}
+
+void main() {
+  // find which bar to use based on where we are on the y axis
+  int bar = int(bars_count * fragCoord.y);
+  float y = bars[bar];
+  float band_size = 1.0 / float(bars_count);
+  float current_band_min = bar * band_size;
+  float current_band_max = (bar + 1) * band_size;
+
+  int hist_length = 512;
+  float win_size = 1.0 / hist_length;
+
+  if (fragCoord.x > 1.0 - win_size) {
+
+    if (fragCoord.y > current_band_min && fragCoord.y < current_band_max) {
+
+      fragColor = vec4(fg_color * y, 1.0);
+    }
+  } else {
+    vec2 offsetCoord = fragCoord;
+    offsetCoord.x += float(win_size);
+    fragColor = texture(inputTexture, offsetCoord);
+  }
+}

old_rach/cava/shaders/winamp_line_style_spectrum.frag

@@ -0,0 +1,112 @@
+#version 330
+
+// Emulate the "line style" spectrum analyzer from Winamp 2.
+// Try this config for a demonstration:
+
+/*
+[general]
+bar_width = 2
+bar_spacing = 0
+higher_cutoff_freq = 22000
+
+[output]
+method = sdl_glsl
+channels = mono
+fragment_shader = winamp_line_style_spectrum.frag
+
+[color]
+background = '#000000'
+gradient = 1
+gradient_color_1 = '#319C08'
+gradient_color_2 = '#29CE10'
+gradient_color_3 = '#BDDE29'
+gradient_color_4 = '#DEA518'
+gradient_color_5 = '#D66600'
+gradient_color_6 = '#CE2910'
+
+[smoothing]
+noise_reduction = 10
+*/
+
+in vec2 fragCoord;
+out vec4 fragColor;
+
+// bar values. defaults to left channels first (low to high), then right (high to low).
+uniform float bars[512];
+
+uniform int bars_count;    // number of bars (left + right) (configurable)
+uniform int bar_width;    // bar width (configurable), not used here
+uniform int bar_spacing;    // space bewteen bars (configurable)
+
+uniform vec3 u_resolution; // window resolution
+
+//colors, configurable in cava config file (r,g,b) (0.0 - 1.0)
+uniform vec3 bg_color; // background color
+uniform vec3 fg_color; // foreground color
+
+uniform int gradient_count;
+uniform vec3 gradient_colors[8]; // gradient colors
+
+vec3 normalize_C(float y,vec3 col_1, vec3 col_2, float y_min, float y_max)
+{
+    //create color based on fraction of this color and next color
+    float yr = (y - y_min) / (y_max - y_min);
+    return col_1 * (1.0 - yr) + col_2 * yr;
+}
+
+void main()
+{
+    // find which bar to use based on where we are on the x axis
+    float x = u_resolution.x * fragCoord.x;
+    int bar = int(bars_count * fragCoord.x);
+
+    //calculate a bar size
+    float bar_size = u_resolution.x / bars_count;
+
+    //the y coordinate is stretched by 4X to resemble Winamp
+    float y =  min(bars[bar] * 4.0, 1.0);
+
+    // make sure there is a thin line at bottom
+    if (y * u_resolution.y < 1.0)
+    {
+      y = 1.0 / u_resolution.y;
+    }
+
+    vec4 bar_color;
+
+    if (gradient_count == 0)
+    {
+        bar_color = vec4(fg_color,1.0);
+    }
+    else
+    {
+        //find color in the configured gradient for the top of the bar
+        int color = int((gradient_count - 1) * y);
+
+        //find where on y this and next color is supposed to be
+        float y_min = float(color) / (gradient_count - 1.0);
+        float y_max = float(color + 1) / (gradient_count - 1.0);
+
+        //make a solid color for the entire bar
+        bar_color = vec4(normalize_C(y, gradient_colors[color], gradient_colors[color + 1], y_min, y_max), 1.0);
+    }
+
+
+    //draw the bar up to current height
+    if (y > fragCoord.y)
+    {
+        //make some space between bars based on settings
+        if (x > (bar + 1) * (bar_size) - bar_spacing)
+        {
+            fragColor = vec4(bg_color,1.0);
+        }
+        else
+        {
+            fragColor = bar_color;
+        }
+    }
+    else
+    {
+        fragColor = vec4(bg_color,1.0);
+    }
+}

old_rach/eww/eww.scss

@@ -0,0 +1,68 @@
+$bg: #282828;
+$fg: #ebdbb2;
+$bg2: #373633;
+$fg2: #32302f;
+
+* {
+	font-family: JetBrains Mono NF;
+	font-size: 14;
+	font-weight: 700;
+}
+
+.bar {
+  border: 2px solid $fg2;
+  border-radius: 12px;
+}
+
+.ws-number-class {
+  font-weight: 900; 
+  margin: 0px 5px 0px 10px;
+  background: $bg2; 
+  padding: 3px 5px 3px 5px;
+  border-radius: 6px;
+}
+
+.ws-title-class {
+  margin: 0px 5px;
+  padding: 3px 5px 3px 5px;
+  border-radius: 6px;
+}
+
+.right1 {
+  margin: 0px 10px;
+}
+
+.date-class {
+  background: $fg;
+  color: $bg;
+  padding: 3px 5px;
+  border-radius: 6px;
+}
+
+.volume-class {
+  background: $bg2;
+  margin: 0px 8px 0px 0px;
+  border-top-right-radius: 6px;
+  border-bottom-right-radius: 6px;
+}
+
+.language-class {
+  background: $bg2;
+  padding: 0px 10px 0px 5px;
+  border-top-left-radius: 6px;
+  border-bottom-left-radius: 6px;
+}
+
+.uptime-class {
+  margin: 0px 10px;
+}
+
+.music {
+  background: $bg2;
+  padding: 3px 3px;
+  border-radius: 6px;
+}
+
+
+
+

old_rach/eww/eww.yuck

@@ -0,0 +1,66 @@
+(defpoll WS :interval "0.1s" "/home/fox/.config/eww/workspace-number.sh")
+(defpoll WST :interval "0.1s" "/home/fox/.config/eww/workspace-title.sh")
+(defpoll DATE :interval "40s" "date +'%H:%M'")
+(defpoll VOL :interval "0.1s" "/home/fox/.config/eww/volume.sh")
+(defpoll LGN :interval "0.1s" "/home/fox/.config/eww/language.sh")
+(defpoll UPT :interval "3600s" "/home/fox/.config/eww/uptime.sh")
+(defpoll MS :interval "0.1s" "/home/fox/.config/eww/music.sh")
+
+(defwindow bar 
+  :monitor 0
+  :geometry (geometry :x "0"
+                      :y "7"
+                      :width "850"
+                      :height "45"
+                      :anchor "bottom center")
+  :stacking "fg"
+  :exclusive true
+  :windowtype "dock"
+  :wm-ignore false
+  (box (left) 
+       (center) 
+       (right)))
+
+(defwidget left []
+  (box :orientation "h"
+       :valign "center"
+       :space-evenly "false"
+       (box :halign "center"
+            :orientation "v"
+            (label :class "ws-number-class"
+                   :text WS))
+       (box :halign "start"
+            :orientation "v"
+            (label :class "ws-title-class"
+                   :text WST))))
+
+(defwidget center []
+  (box :orientation "h"
+       :halign "center"
+       :valign "center"
+       :class "music"
+       MS))
+
+(defwidget right []
+  (box :orientation "h"
+       :halign "end"
+       :valign "center"
+       :space-evenly "false"
+       :vexpand "false"
+       :hexpand "false"
+       :class "right1"
+       (box :orientation "h" :class "upt"
+         (label :class "uptime-class"
+                   :text UPT))
+       (box (label :class "language-class"
+                   :text LGN))
+       (box (label :class "volume-class"
+                   :text VOL))
+       (box (label :class "date-class"
+                   :text DATE))))
+
+
+
+
+
+

old_rach/eww/language.sh

@@ -0,0 +1,7 @@
+#!/bin/bash
+if hyprctl devices | grep -q "active keymap: Russian"; then
+    echo "ru"
+else
+    echo "en"
+fi
+

old_rach/eww/music.sh

@@ -0,0 +1,15 @@
+#!/bin/bash
+music=$(playerctl metadata --format "{{title}}" 2>/dev/null)
+
+max_length=15
+
+if [ -z "$music" ]; then
+    echo ":: No playing ::"
+else
+    if [ ${#music} -gt $max_length ]; then
+        echo "${music:0:$max_length}..."
+    else
+        echo "$music"
+    fi
+fi
+

old_rach/eww/uptime.sh

@@ -0,0 +1,3 @@
+command=$(uptime | awk '{print $3}')
+
+echo "$command "

old_rach/eww/volume.sh

@@ -0,0 +1,4 @@
+#!/bin/bash
+vol=$(pamixer --get-volume)
+
+echo "  $vol "

old_rach/eww/workspace-number.sh

@@ -0,0 +1,5 @@
+#!/bin/bash
+current_ws=$(hyprctl activeworkspace | grep "workspace ID" | awk '{print $3}' | head -n1)
+
+#echo "Workspace $current_ws"
+echo "  $current_ws"

old_rach/eww/workspace-title.sh

@@ -0,0 +1,25 @@
+#!/bin/bash
+current_tl=$(hyprctl activewindow | grep -A1 "title" | tail -n1 | awk '{$1=""; print substr($0, 2)}')
+air=""
+
+if [[ $current_tl != $air ]]; then
+		case $current_tl in
+			zen)
+				echo "  Browser"
+				;;
+			kitty)
+				echo "  Terminal"
+				;;
+			org.telegram.desktop)
+				echo "  Telegram"
+				;;
+			obsidian)
+				echo "  Obsidian"
+				;;
+			*)
+				echo "$current_tl"
+				;;
+		esac
+	else
+		echo "󰇄  Desktop"
+fi

old_rach/eww/ws.sh

@@ -0,0 +1,47 @@
+#!/bin/bash
+#c_ws=$(	hyprctl activeworkspace | grep "workspace ID" | awk '{print $3}' | head -1)
+#l_ws=""
+
+#while true; do
+#	if [[ "$c_ws" != "$l_ws" ]]; then
+#			echo $c_ws
+#	    l_ws=$c_ws
+#	fi
+#done
+
+#prev_value_ws=""
+#while true; do
+#  current_value_ws=$(hyprctl activeworkspace | grep "workspace ID" | awk '{print $3}' | head -1)  
+#  if [[ "$current_value_ws" != "$prev_value_ws" ]]; then
+#    echo "$current_value_ws"
+#    prev_value_ws="$current_value_ws"
+#  fi
+#done
+
+#prev_value_tl=""
+#while true; do
+#	current_value_tl=$(hyprctl activewindow | grep title | awk 'NR == 2' | awk '{print $2}')
+#	if [[ "$current_value_tl" != "$prev_value_tl" ]]; then
+#    echo "$current_value_tl"
+#   prev_value_ws="$current_value_tl"
+#  fi
+#done
+
+
+prev_ws=""
+prev_tl=""
+output_file="/home/fox/.cache/waybar_output"
+
+while true; do
+  current_ws=$(hyprctl activeworkspace | grep "workspace ID" | awk '{print $3}' | head -n1)
+  current_tl=$(hyprctl activewindow | grep -A1 "title" | tail -n1 | awk '{$1=""; print substr($0, 2)}')
+
+  if [[ "$current_ws" != "$prev_ws" || "$current_tl" != "$prev_tl" ]]; then
+    echo "$current_ws"
+		echo "$current_tl"
+    prev_ws="$current_ws"
+    prev_tl="$current_tl"
+  fi
+
+  sleep 0.1
+done

old_rach/fastfetch/config.jsonc

@@ -0,0 +1,32 @@
+{
+	"logo": {
+		"source": "arch_small"
+	},
+
+	"display": {
+		"separator": " :: "
+	},
+
+	"modules": [
+		{
+			"type": "os",
+			"key": "dis"
+		},
+		{
+			"type": "kernel",
+			"key": "krn"
+		},
+		{
+			"type": "uptime",
+			"key": "upt"
+		},
+		{
+			"type": "packages",
+			"key": "pks"
+		},
+		{
+			"type": "wm",
+			"key": "wdm"
+		}
+	]
+}

old_rach/go/telemetry/local/local.2025-06-16.json

@@ -0,0 +1,124 @@
+{
+ "Week": "2025-06-16",
+ "LastWeek": "",
+ "X": 0.6475652226649526,
+ "Programs": [
+  {
+   "Program": "cmd/asm",
+   "Version": "go1.24.4",
+   "GoVersion": "go1.24.4",
+   "GOOS": "linux",
+   "GOARCH": "amd64",
+   "Counters": {
+    "asm/flag:D": 172,
+    "asm/flag:I": 172,
+    "asm/flag:gensymabis": 65,
+    "asm/flag:o": 172,
+    "asm/flag:p": 172,
+    "asm/flag:shared": 91,
+    "asm/flag:trimpath": 172,
+    "asm/invocations": 172
+   },
+   "Stacks": {}
+  },
+  {
+   "Program": "cmd/cgo",
+   "Version": "go1.24.4",
+   "GoVersion": "go1.24.4",
+   "GOOS": "linux",
+   "GOARCH": "amd64",
+   "Counters": {
+    "cgo/flag:dynimport": 8,
+    "cgo/flag:dynlinker": 3,
+    "cgo/flag:dynout": 8,
+    "cgo/flag:dynpackage": 8,
+    "cgo/flag:import_runtime_cgo": 3,
+    "cgo/flag:import_syscall": 3,
+    "cgo/flag:importpath": 8,
+    "cgo/flag:ldflags": 8,
+    "cgo/flag:objdir": 8,
+    "cgo/invocations": 16
+   },
+   "Stacks": {}
+  },
+  {
+   "Program": "cmd/compile",
+   "Version": "go1.24.4",
+   "GoVersion": "go1.24.4",
+   "GOOS": "linux",
+   "GOARCH": "amd64",
+   "Counters": {
+    "compile/flag:asmhdr": 65,
+    "compile/flag:buildid": 430,
+    "compile/flag:c": 430,
+    "compile/flag:complete": 350,
+    "compile/flag:goversion": 430,
+    "compile/flag:importcfg": 430,
+    "compile/flag:installsuffix": 292,
+    "compile/flag:lang": 430,
+    "compile/flag:nolocalimports": 430,
+    "compile/flag:o": 430,
+    "compile/flag:p": 430,
+    "compile/flag:pack": 430,
+    "compile/flag:shared": 292,
+    "compile/flag:std": 323,
+    "compile/flag:symabis": 65,
+    "compile/flag:trimpath": 430,
+    "compile/invocations": 442
+   },
+   "Stacks": {}
+  },
+  {
+   "Program": "cmd/go",
+   "Version": "go1.24.4",
+   "GoVersion": "go1.24.4",
+   "GOOS": "linux",
+   "GOARCH": "amd64",
+   "Counters": {
+    "go/build/flag/buildmode:pie": 2,
+    "go/build/flag:buildmode": 2,
+    "go/build/flag:ldflags": 2,
+    "go/build/flag:mod": 2,
+    "go/build/flag:modcacherw": 2,
+    "go/build/flag:o": 3,
+    "go/build/flag:trimpath": 2,
+    "go/build/flag:v": 2,
+    "go/buildcache/hit": 166,
+    "go/buildcache/miss": 433,
+    "go/buildcache/stdlib-recompiled": 3,
+    "go/goroot:usr-lib-go": 4,
+    "go/invocations": 4,
+    "go/mode:module": 4,
+    "go/platform/host/linux/major-version:6": 4,
+    "go/platform/host/linux/version:6-15": 4,
+    "go/platform/target/goamd64:v1": 4,
+    "go/platform/target/goarch:amd64": 4,
+    "go/platform/target/goos:linux": 4,
+    "go/subcommand:build": 3,
+    "go/subcommand:mod-tidy": 1
+   },
+   "Stacks": {}
+  },
+  {
+   "Program": "cmd/link",
+   "Version": "go1.24.4",
+   "GoVersion": "go1.24.4",
+   "GOOS": "linux",
+   "GOARCH": "amd64",
+   "Counters": {
+    "link/flag:X": 3,
+    "link/flag:buildid": 3,
+    "link/flag:buildmode": 3,
+    "link/flag:compressdwarf": 1,
+    "link/flag:extld": 3,
+    "link/flag:importcfg": 3,
+    "link/flag:installsuffix": 2,
+    "link/flag:linkmode": 2,
+    "link/flag:o": 3,
+    "link/invocations": 6
+   },
+   "Stacks": {}
+  }
+ ],
+ "Config": "v0.0.0-0"
+}

old_rach/go/telemetry/local/weekends

@@ -0,0 +1 @@
+1

old_rach/gtk-3.0/bookmarks

@@ -0,0 +1,5 @@
+file:///home/fox/%D0%94%D0%BE%D0%BA%D1%83%D0%BC%D0%B5%D0%BD%D1%82%D1%8B
+file:///home/fox/%D0%9C%D1%83%D0%B7%D1%8B%D0%BA%D0%B0
+file:///home/fox/%D0%98%D0%B7%D0%BE%D0%B1%D1%80%D0%B0%D0%B6%D0%B5%D0%BD%D0%B8%D1%8F
+file:///home/fox/%D0%92%D0%B8%D0%B4%D0%B5%D0%BE
+file:///home/fox/%D0%97%D0%B0%D0%B3%D1%80%D1%83%D0%B7%D0%BA%D0%B8

old_rach/gtk-3.0/settings.ini

@@ -0,0 +1,17 @@
+[Settings]
+gtk-theme-name=theme
+gtk-icon-theme-name=Gruvbox-Plus-Dark
+gtk-font-name=JetBrains Mono Medium 10
+gtk-cursor-theme-name=cursor
+gtk-cursor-theme-size=25
+gtk-toolbar-style=GTK_TOOLBAR_ICONS
+gtk-toolbar-icon-size=GTK_ICON_SIZE_LARGE_TOOLBAR
+gtk-button-images=0
+gtk-menu-images=0
+gtk-enable-event-sounds=0
+gtk-enable-input-feedback-sounds=0
+gtk-xft-antialias=1
+gtk-xft-hinting=1
+gtk-xft-hintstyle=hintslight
+gtk-xft-rgba=rgb
+gtk-application-prefer-dark-theme=0

old_rach/gtk-4.0/assets

@@ -0,0 +1 @@
+/home/fox/.themes/theme/gtk-4.0/assets

old_rach/gtk-4.0/gtk-dark.css

@@ -0,0 +1 @@
+/home/fox/.themes/theme/gtk-4.0/gtk-dark.css

old_rach/gtk-4.0/gtk.css

@@ -0,0 +1 @@
+/home/fox/.themes/theme/gtk-4.0/gtk.css

old_rach/htop/htoprc

@@ -0,0 +1,64 @@
+# Beware! This file is rewritten by htop when settings are changed in the interface.
+# The parser is also very primitive, and not human-friendly.
+htop_version=3.4.1-3.4.1
+config_reader_min_version=3
+fields=0 48 17 18 38 39 40 2 46 47 49 1
+hide_kernel_threads=1
+hide_userland_threads=0
+hide_running_in_container=0
+shadow_other_users=0
+show_thread_names=0
+show_program_path=1
+highlight_base_name=0
+highlight_deleted_exe=1
+shadow_distribution_path_prefix=0
+highlight_megabytes=1
+highlight_threads=1
+highlight_changes=0
+highlight_changes_delay_secs=5
+find_comm_in_cmdline=1
+strip_exe_from_cmdline=1
+show_merged_command=0
+header_margin=1
+screen_tabs=1
+detailed_cpu_time=0
+cpu_count_from_one=0
+show_cpu_usage=1
+show_cpu_frequency=0
+show_cpu_temperature=0
+degree_fahrenheit=0
+show_cached_memory=1
+update_process_names=0
+account_guest_in_cpu_meter=0
+color_scheme=0
+enable_mouse=1
+delay=15
+hide_function_bar=0
+header_layout=two_50_50
+column_meters_0=AllCPUs Memory Swap
+column_meter_modes_0=1 1 1
+column_meters_1=Tasks LoadAverage Uptime
+column_meter_modes_1=2 2 2
+tree_view=0
+sort_key=46
+tree_sort_key=0
+sort_direction=-1
+tree_sort_direction=1
+tree_view_always_by_pid=0
+all_branches_collapsed=0
+screen:Main=PID USER PRIORITY NICE M_VIRT M_RESIDENT M_SHARE STATE PERCENT_CPU PERCENT_MEM TIME Command
+.sort_key=PERCENT_CPU
+.tree_sort_key=PID
+.tree_view_always_by_pid=0
+.tree_view=0
+.sort_direction=-1
+.tree_sort_direction=1
+.all_branches_collapsed=0
+screen:I/O=PID USER IO_PRIORITY IO_RATE IO_READ_RATE IO_WRITE_RATE PERCENT_SWAP_DELAY PERCENT_IO_DELAY Command
+.sort_key=IO_RATE
+.tree_sort_key=PID
+.tree_view_always_by_pid=0
+.tree_view=0
+.sort_direction=-1
+.tree_sort_direction=1
+.all_branches_collapsed=0

old_rach/hypr/hyprland.conf

@@ -0,0 +1,147 @@
+autogenerated = 0
+
+monitor = HDMI-A-2,1920x1080@100,0x100,1
+
+
+# exec-once = $terminal
+exec-once = hyprctl setcursor cursor 25
+exec-once = hyprpaper
+exec-once = eww open bar
+
+env = XCURSOR_SIZE,24
+env = HYPRCURSOR_SIZE,24
+env = QT_QPA_PLATFORMTHEME,qt6ct
+env = XDG_CURRENT_DESKTOP='Hyprland'
+env = XDG_SESSION_TYPE='wayland'
+env = XDG_SESSION_DESKTOP='Hyprland'
+env = QT_AUTO_SCREEN_SCALE_FACTOR='1'
+env = QT_QPA_PLATFORM='wayland'
+env = QT_QPA_PLATFORMTHEME='gtk3'
+
+
+general {
+    gaps_in = 15
+    gaps_out = 30
+
+    border_size = 2
+
+    col.active_border = rgb(32302f) 
+    col.inactive_border = rgb(1d2021)
+
+    resize_on_border = true
+    allow_tearing = true
+    layout = dwindle
+}
+
+decoration {
+    rounding = 10
+    rounding_power = 2
+
+    active_opacity = 1.0
+    inactive_opacity = 1.0
+
+    shadow {
+        enabled = true
+        range = 5
+        render_power = 5
+        color = rgba(1d2021ee)
+    }
+
+    blur {
+        enabled = true
+        size = 3
+        passes = 1
+
+        vibrancy = 0.1696
+    }
+}
+
+animations {
+    enabled = yes, please :)
+
+    bezier = easeOutQuint,0.23,1,0.32,1
+    bezier = easeInOutCubic,0.65,0.05,0.36,1
+    bezier = linear,0,0,1,1
+    bezier = almostLinear,0.5,0.5,0.75,1.0
+    bezier = quick,0.15,0,0.1,1
+
+    animation = global, 1, 10, default
+    animation = border, 1, 5.39, easeOutQuint
+    animation = windows, 1, 4.79, easeOutQuint
+    animation = windowsIn, 1, 4.1, easeOutQuint, popin 87%
+    animation = windowsOut, 1, 1.49, linear, popin 87%
+    animation = fadeIn, 1, 1.73, almostLinear
+    animation = fadeOut, 1, 1.46, almostLinear
+    animation = fade, 1, 3.03, quick
+    animation = layers, 1, 3.81, easeOutQuint
+    animation = layersIn, 1, 4, easeOutQuint, fade
+    animation = layersOut, 1, 1.5, linear, fade
+    animation = fadeLayersIn, 1, 1.79, almostLinear
+    animation = fadeLayersOut, 1, 1.39, almostLinear
+    animation = workspaces, 1, 1.94, almostLinear, fade
+    animation = workspacesIn, 1, 1.21, almostLinear, fade
+    animation = workspacesOut, 1, 1.94, almostLinear, fade
+}
+
+dwindle {
+    pseudotile = true 
+    preserve_split = true 
+}
+
+misc {
+    force_default_wallpaper = 0 
+    disable_hyprland_logo = true
+}
+
+input {
+    kb_layout = us,ru
+    kb_options = grp:alt_shift_toggle
+    follow_mouse = 1
+    sensitivity = 1.3 
+}
+
+gestures {
+    workspace_swipe = false
+}
+
+
+$mod = SUPER
+
+bind = alt, l, exec, eww open lock-dialog
+bind = alt, g, exec, eww close bar
+bind = alt, m, exec, eww open bar
+
+bind = $mod shift, q, exit
+bind = $mod ctrl, r, exec, eww open reboot-dialog
+bind = $mod ctrl, q, exec, eww open off-dialog
+bind = alt, l, exec, eww open lock-dialog-zopa
+
+bind = $mod, c, killactive,
+bind = $mod, s, togglefloating,
+bind = $mod, t, pseudo,
+bind = $mod, g, togglesplit
+
+bind = alt, space, exec, rofi -show drun -config ~/.config/rofi/rofi.rasi
+
+bind = $mod, 1, workspace, 1
+bind = $mod, 2, workspace, 2
+bind = $mod, 3, workspace, 3
+bind = $mod, 4, workspace, 4
+bind = $mod, 5, workspace, 5
+bind = $mod, 6, workspace, 6
+
+bind = $mod SHIFT, 1, movetoworkspace, 1
+bind = $mod SHIFT, 2, movetoworkspace, 2
+bind = $mod SHIFT, 3, movetoworkspace, 3
+bind = $mod SHIFT, 4, movetoworkspace, 4
+bind = $mod SHIFT, 5, movetoworkspace, 5
+bind = $mod SHIFT, 6, movetoworkspace, 6
+
+bind = $mod, mouse_down, workspace, e+1
+bind = $mod, mouse_up, workspace, e-1
+
+# Move/resize windows with mainMod + LMB/RMB and dragging
+bindm = $mod, mouse:272, movewindow
+bindm = $mod, mouse:273, resizewindow
+
+

old_rach/hypr/hyprlock.conf

@@ -0,0 +1,35 @@
+general {
+	grace = 0
+	hide_cursor = false
+}
+
+background {
+	path = /home/fox/.config/hypr/wallp.jpg
+	blur_passes = 2
+}
+
+input-field {
+	size = 200, 40
+	fade_on_empty = false
+	rounding = 8
+	position = 0, -370
+	dots_center = false
+	outline_thickness = 2
+	outer_color = rgb(373633)
+	inner_color = rgb(282828)
+	font_color = rgb(ebdbb2)
+}
+
+image {
+	path = /home/fox/.config/hypr/avatar.jpg
+	size = 110
+	border_size = 2
+	position = 0, -250
+	border_color = rgb(373633)
+}
+
+label {
+	text = 
+	color = rgb(373633)
+	font_family = JetBrains Mono NF
+}

old_rach/hypr/hyprpaper.conf

@@ -0,0 +1,2 @@
+preload = ~/.config/hypr/wallp.jpg
+wallpaper = HDMI-A-2, ~/.config/hypr/wallp.jpg

old_rach/kitty/kitty.conf

@@ -0,0 +1,61 @@
+cursor_shape beam
+window_padding_width 6
+enable_audio_bell no
+
+font_family      JetBrainsMono NF
+bold_font        auto
+italic_font      auto
+bold_italic_font auto
+
+cursor                  #928374
+cursor_text_color       background
+
+url_color               #83a598
+
+visual_bell_color       #8ec07c
+bell_border_color       #8ec07c
+
+active_border_color     #d3869b
+inactive_border_color   #665c54
+
+foreground              #ebdbb2
+background              #282828
+selection_foreground    #928374
+selection_background    #ebdbb2
+
+active_tab_foreground   #fbf1c7
+active_tab_background   #665c54
+inactive_tab_foreground #a89984
+inactive_tab_background #3c3836
+
+# black  (bg3/bg4)
+color0                  #665c54
+color8                  #7c6f64
+
+# red
+color1                  #cc241d
+color9                  #fb4934
+
+#: green
+color2                  #98971a
+color10                 #b8bb26
+
+# yellow
+color3                  #d79921
+color11                 #fabd2f
+
+# blue
+color4                  #458588
+color12                 #83a598
+
+# purple
+color5                  #b16286
+color13                 #d3869b
+
+# aqua
+color6                  #689d6a
+color14                 #8ec07c
+
+# white (fg4/fg3)
+color7                  #a89984
+color15                 #bdae93

old_rach/kritadisplayrc

@@ -0,0 +1,2 @@
+[General]
+canvasState=OPENGL_SUCCESS

old_rach/mimeapps.list

@@ -0,0 +1,23 @@
+[Default Applications]
+x-scheme-handler/http=zen.desktop
+x-scheme-handler/https=zen.desktop
+x-scheme-handler/chrome=zen.desktop
+text/html=zen.desktop
+application/x-extension-htm=zen.desktop
+application/x-extension-html=zen.desktop
+application/x-extension-shtml=zen.desktop
+application/xhtml+xml=zen.desktop
+application/x-extension-xhtml=zen.desktop
+application/x-extension-xht=zen.desktop
+
+[Added Associations]
+x-scheme-handler/http=zen.desktop;xfce4-web-browser.desktop;
+x-scheme-handler/https=zen.desktop;xfce4-web-browser.desktop;
+x-scheme-handler/chrome=zen.desktop;
+text/html=zen.desktop;
+application/x-extension-htm=zen.desktop;
+application/x-extension-html=zen.desktop;
+application/x-extension-shtml=zen.desktop;
+application/xhtml+xml=zen.desktop;
+application/x-extension-xhtml=zen.desktop;
+application/x-extension-xht=zen.desktop;

old_rach/nvim/init.vim

@@ -0,0 +1,14 @@
+call plug#begin()
+
+Plug 'ellisonleao/gruvbox.nvim'
+Plug 'elkowar/yuck.vim'
+
+call plug#end()
+
+colorscheme gruvbox
+set tabstop=2
+set softtabstop=2
+set shiftwidth=2
+set laststatus=0
+set number
+set shortmess+=I

old_rach/nwg-look/config

@@ -0,0 +1,7 @@
+{
+ "export-settings-ini": true,
+ "export-gtkrc-20": true,
+ "export-index-theme": true,
+ "export-xsettingsd": true,
+ "export-gtk4-symlinks": true
+}